Featured Links

Information on City and Well Water Testing (Mail Order)

Alkaline Water Systems (Treatment)

Recent Sponsors for this Portal 
B.F. Environmental Consultants Inc.
Water Testing Kits - Do It Yourself at Home !
Crystal Quest Water Treatment (pH control) (Official Industrial Distributor) *
(*New Sponsor)



The technical definition of pH is that it is a measure of the activity of the hydrogen ion (H+) and is reported as the reciprocal of the logarithm of the hydrogen ion activity. Therefore, a water with a pH of 7 has 10-7 moles per liter of hydrogen ions; whereas, a pH of 6 is 10-6 moles per liter. The pH scale ranges from 0 to 14.

0 7 14
acidic neutral basic

In general, a water with a pH < 7 is considered acidic and with a pH > 7 is considered basic. The normal range for pH in surface water systems is 6.5 to 8.5 and for groundwater systems 6 to 8.5. Alkalinity is a measure of the capacity of the water to resists a change in pH that would tend to make the water more acidic. The measurement of alkalinity and pH is needed to determine the corrosivity of the water.

The pH of pure water (H20) is 7 at 25oC, but when exposed to the carbon dioxide in the atmosphere this equilibrium results in a pH of approximately 5.2. Because of the association of pH with atmospheric gasses and temperature, it is strongly recommended that the water be tested as soon as possible. The pH of the water is not a measure of the strength of the acidic or basic solution and alone does not provide a full picture of the characteristics or limitations with the water supply.

In general, a water with a low pH (< 6.5) could be acidic, soft, and corrosive. Therefore, the water could leach metal ions such as iron, manganese, copper, lead, and zinc from the aquifer, plumbing fixtures, and piping. Therefore, a water with a low pH could contain elevated levels of toxic metals, cause premature damage to metal piping, and have associated aesthetic problems such as a metallic or sour taste, staining of laundry, and the characteristic "blue-green" staining of sinks and drains . The primary way to treat the problem of low pH water is with the use of a neutralizer. The neutralizer feeds a solution into the water to prevent the water from reacting with the house plumbing or contributing to electrolytic corrosion; a typical neutralizing chemical is soda ash. Neutralizing with soda ash increases the sodium content of the water.

A water with a pH > 8.5 could indicate that the water is hard. Hard water does not pose a health risk, but can cause aesthetic problems. These problems include:

Formation of a "scale" or precipitate on piping and fixtures causing water pressures and interior diameter of piping to decrease;

Causes an alkali taste to the water and can make coffee taste bitter;

Formation of a scale or deposit on dishes, utensils, and laundry basins;

Difficulty in getting soaps and detergents to foam and formation of insoluble precipitates on clothing, etc.; and

Decreases efficiency of electric water heaters.

Typically these problems are encountered when the hardness exceeds 100 to 200 milligram (mg) CaCO3/liter (L), which is equivalent to 12 grains per gallon. Water can be softened through the use of ion-exchange or the addition of a lime-soda ash mixture, but both processes increase the sodium content of the water.

Note: "The ideal pH level of alkaline ionized water for long term human consumption is between 8.5 and 9.5. (Source: Bawell Water Ionizers)".   Interesting book on alkaline water.

Measuring Water Quality (Field Meters) - Students (Science Fairs) / Professionals

Measuring pH and pH/ORP sensor.



pH of Common Liquids

Vinegar 3.0
Wine 2.8 - 3.8
Beer 4 - 5
Milk 6.3 - 6.6
Seawater 8.3
(Source: Driscoll, 1986)

Online Training Courses

Training for Professional Engineers (PDH) and other Professionals

Self-Help Training